Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Associate Redirecting Number to Calling Party Number

Hi, is it possible to associate Redirecting Number to Calling Party Number using translation settings?

voice translation-rule 3

rule 1 /^8/ /123456\1/

rule 2 /.*/ /1234562000/

voice translation-profile OUTGOING-CLI

translate calling 3

translate redirect-called 3

trunk group  2

translation-profile outgoing OUTGOING-CLI

debug isdn q931:

        Bearer Capability i = 0x8090A2

                Standard = CCITT

                Transfer Capability = Speech

                Transfer Mode = Circuit

                Transfer Rate = 64 kbit/s

        Channel ID i = 0xA98381

                Exclusive, Channel 1

        Calling Party Number i = 0x2181, '1234562000'

                Plan:

basf-r-ustc-11#ISDN, Type:National

        Called Party Number i = 0x91, '011551112345678'

                Plan:ISDN, Type:International

        Redirecting Number i = 0x00008F, '1234562451'

                Plan:Unknown, Type:Unknown

Everyone's tags (2)
2 REPLIES

Associate Redirecting Number to Calling Party Number

You can override the redirecting number with calling number using the command "clid override rdnis" in pots dial peer.

Regards.

New Member

Associate Redirecting Number to Calling Party Number

707
Views
0
Helpful
2
Replies