Hi, everyone. I have a router voice gateway 4331 ISR who has a SIP Trunk from a ITSP "B", but, when I try to make a call to PSTN, it doesn't work to a specifically carrier "Telcel", incomings and outgoings calls. Only to/from this carrier doesn't wor...
Forum Posts
Cisco IP Phones SPA 525G were connected via WIFI and worked perfectly fine. But after changing the router, the phones can not connect to WIFI as they keep displaying "Failed to Associate with SSID, keep trying in the background". When we add the netw...
Hello, for the ISR4331 do I need to install a PVDM64 on the NIM-2MFT to support voice? I only have 7 phones and a PVDM32 on the motherboardThanks
Hi we have problem with cisco Finesse logout with all agents when he received calls or try to make outbound calls this problem start with us when our country change the time (Egypt summer time ) so can we know what we do in this problem
Hello Guys:Greetings. We have a hacker that is login in into the Broadsoft GUI and is enabling the Outgoing calling Plan to do international connections. The connection to the Access Servers is via XSP (or WS old times). I tried to find out the sourc...
Guys, Do we have an command option to disable a range of ports for SIP in a Cisco router just like the below command in ASA?no inspect sip 6100-6899I am having a Cisco 1121 and 921 router in place. (IOS-XE and IOS). Thanks in Advance!
I have a single VG204, which is used for internal calls only using POTS phones.I would like to have a dial-peer on extension 1234 that runs a TCL script when dialled from a POTS phone.The TCL script should play an announcement and once the announceme...
Hey All I have been searching for any support documents or information to see if this is supported model or design, but is it possible and supported for Webex calling to run on one CUBE and then trunk across other calling using Dial peers to another ...
Firmware Version: ATA19x.11-2-3MPP0001-028.imgXML Used:<Web_Management><Web_Utility_Access_HTTP>1</Web_Utility_Access_HTTP><Web_Utility_Access_HTTPS>0</Web_Utility_Access_HTTPS><Web_Remote_Management>1</Web_Remote_Management><Remote_Web_Utility_Acces...
Hi all,I developed a Website that binds Phone Nr. to our Customers.I need to launch an URL (or directly open Browser pointing to an URL) when the user clicks "Answer" on Cisco Jabber Client (v.14.1.1) passing the Phone Nr. as parameter (e.g. http://m...
We have a customer that wants to utilize our fire alarm system to do their paging function. They have the below Cisco System:Cisco Integrated Services Router 4331 - Unified Communications Bundle Mfg. Part#: ISR4331-V/K9 dxz Cisco Network Interface Mo...
We have issues where all Cisco phones are not displaying the set German language for the buttons/menu options. It is still in English despite setting this as German within the handsets and on the web interface for the phones.
I want to setup a shared line such as 3299 which would show as a second line on a group of phones. We will then configure our AA to send calls to 3299 when the caller selects the option to speak to a representative. I don’t want to have to setup a ph...
Hello All, I am facing some issues while communicating with the SIP Lines, the SIP Server provided by the service provider (STC-Saudi Arab) is pingable and everything seems to be fine in configuration as well, I have done this same configuration on m...
I'm setting up our Cisco router to for best practices for a new VoIP system we're adopting (8x8). I've got most things figured out, but I wanted to verify whether my thoughts are correct or not on on particular thing. The guide for setting up a Cis...
