Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Billing system RTS with AS5400

dears,

i have problem with AAA i have a billing system i need AS5400 to make AAA with it

i did this configuration :

3. aaa new-model

4. aaa authentication login default group radius

5. aaa authorization exec default group radius

6. aaa accounting connection default start-stop radius

7. radius-server host

8. radius-server host non-standard

9. radius-server key

10. radius-server vsa send accounting

radius-server vsa send authentication

11. gw-accounting aaa

12. adius-server host 171.69.58.104 auth-port 165 acct-port 1646

13.radius-server key testing123

and did not work and no radius packet reach radius server .... i need your help please.

thx

2 REPLIES

Re: Billing system RTS with AS5400

It will not.

You have to configure the AAA class not for "default", but for h323.

aaa accounting connection h323 start-stop radius

Add this command and then run:

debug radius accounting

debug radius verbose

term mon

and you will see how the Cisco GW will start sending accounting packets to the billing system (Radius server).

Then, if you want h323 authentication as well:

aaa authentication login h323 group radius

New Member

Re: Billing system RTS with AS5400

thank you,

dear i have important question i need to implement and configure my Voice Gateway AS5400 to send numbering with E.164 formate do you have any ideas about the commands i need to put at my GW?

128
Views
0
Helpful
2
Replies