Binding Singaling and Media on Multiple loopback interface
As i have reseached a week ago about binding signaling and media over voice gateway but seem no any clue about binding signaling+ Media on multiple loopback interface.
The reason i ask like this because i have reserved pool of 192.168.0.1/24 for my voice network and binded signaling + media to only 1 of loopback interface my voice gateway but one day there are some bgp flaping at ISP provider caused this IP pool range suspend then all my call could not go thru.
I am using AS5400 Version 12.4(11)T4. I wonder how can we bind signaling and Media on 2 loopback IP address?
Example= Binding signaling + media on loopback interface1 ip=192.168.0.1 and lookpback interface2= 10.0.0.1 together. Once such problem above happened again then call can send from souce loopback2 interface? Please advice.
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...