Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Call forwarding Issue with CME

I have a Call Manager Express system version 3.2 router 2811. When I dial long distance everything works fine but if I forward a call to a long distance number I recieve dead air and see the following error in my debugs

Cause i = 0x82FF - Interworking error; unspecified

> Progress Ind i = 0x8281 - Call not end-to-end ISDN, may have

> in-band info

> *Mar 10 18:45:18.579: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8

> callref = 0x0002

Anyone see this issue or know what this error means? I can forward calls to external local numbers and the local CO says it sees 11 digits coming across and pointed to AT&T.

Thanks

2 REPLIES
Silver

Re: Call forwarding Issue with CME

The cause code says problem with local telco.

Check the codecs too.

http://www.cisco.com/warp/public/129/isdn_disc_code.html

New Member

Re: Call forwarding Issue with CME

I also have this same issue. Have you found the fix yet??

535
Views
0
Helpful
2
Replies
CreatePlease to create content