Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Call manager Express and MGCP

Dear all,

is it possible for a CME ,wich is loaded on a router, to handle mgcp calls on FXS ports with all mgcp feature ,like call waiting ,call transfer,...?

Best Rgards,

Farshid.sh

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Call manager Express and MGCP

Hi Farshid,

I think that you would want to use SCCP (not MGCP),due to the fact that SCCP has support for many common Telephony features;

Check out Table 1 from this VG224 doc;

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_data_sheet09186a00801d87f6.html

This is also an excellent doc;

SCCP Controlled Analog (FXS) Ports with Supplementary Features in Cisco IOS Gateways

http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a0080483a76.html

Hope this helps!

Rob

3 REPLIES
Community Member

Re: Call manager Express and MGCP

FXS ports handle all the aboves features on the CME, but you have to configure the CME to use SCCP with the FXS.

Hall of Fame Super Red

Re: Call manager Express and MGCP

Hi Farshid,

I think that you would want to use SCCP (not MGCP),due to the fact that SCCP has support for many common Telephony features;

Check out Table 1 from this VG224 doc;

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_data_sheet09186a00801d87f6.html

This is also an excellent doc;

SCCP Controlled Analog (FXS) Ports with Supplementary Features in Cisco IOS Gateways

http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a0080483a76.html

Hope this helps!

Rob

Community Member

Re: Call manager Express and MGCP

Dear rob and noc-au,

many thanks to your helpful replies,wish u all the bests.

Regards,

Farshid.

215
Views
4
Helpful
3
Replies
CreatePlease to create content