Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Called Party Busy Call Issue!!!!

I have a user who is trying to receive inbound calls from the PSTN but whenever you dial his external number you will get a immediate busy signal. If he is called internally there is no issue at all. I have checked the Call Manager and did not notice anything weird in it. I have also reloaded his phone from the defaults and allowed call manager to restore the software and configs. What should I do now? I am not a voice expert.

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: Called Party Busy Call Issue!!!!

How does the call get to the user's phone. Translation pattern? Digit stripping at the gateway? An auto attendant? What type of gateway? Callmanager version?

Brandon

New Member

Re: Called Party Busy Call Issue!!!!

1. Make sure that your dialing pattern is correct.

2. Enable the debug commands on the gateway to ensure that the call is hitting the gateway. (Debug isdn q931)

4 REPLIES

Re: Called Party Busy Call Issue!!!!

How does the call get to the user's phone. Translation pattern? Digit stripping at the gateway? An auto attendant? What type of gateway? Callmanager version?

Brandon

New Member

Re: Called Party Busy Call Issue!!!!

Thanks bbuffin. I found that this issue was a carrier side issue. They disconnected the phone line. Imagine That.

New Member

Re: Called Party Busy Call Issue!!!!

1. Make sure that your dialing pattern is correct.

2. Enable the debug commands on the gateway to ensure that the call is hitting the gateway. (Debug isdn q931)

New Member

Re: Called Party Busy Call Issue!!!!

Thanks Karthiksp. I found that this issue was a carrier side issue. They disconnected the phone line. Imagine That.

251
Views
0
Helpful
4
Replies
CreatePlease to create content