Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Calling Line Restricted Problem

Hi to all,

in the following scenario ccme interconnected to Panasonic KX-TD-816-232 PBX through ISDN BRI, can't see calling line ID on incoming(for ccme) calls.

In voip ccapi debug i see Presentation=Restricted on the incoming dial-peer 10. Tried to override this field with no success. Please help with this. Will atach debug and running config.

1 REPLY
Hall of Fame Super Gold

Re: Calling Line Restricted Problem

Indeed the PBX is placing the call with presentation restricted:

Calling Party Number i = 0x01A1, '114' <-- BIT 5 is set !

Hence IOS is dutifully restricting CLID.

Please check PBX configuration to allow CLID presentation.

Hope this helps, please rate post if it does!

288
Views
4
Helpful
1
Replies
CreatePlease login to create content