We setup a h323 gateway at a customer site and they have an analog line connecting to a fxo port. The analog line is for 911 calls only no incoming. We they try calling over the analog line the call fails with a call entry(disconnect cause=47) which means unallocated resourses. There is a PVDM2-8 in the router and the analog line is the only line connected so I am not sure why we would be getting unallocated resources.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...