Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cannot configure codec g729a & g729ab in Cisco AS5350XM

Why I cannot configure the codec g729a & g729ab at dial-peer voice or voice codec class in AS5350XM.

I noticed in the datasheet in this link for IP-IP GW,

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps5640/product_data_sheet09186a00801da698.html

all codec for G729 are supported.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Cannot configure codec g729a & g729ab in Cisco AS5350XM

In some models you configure that under voice-cards. Others support flexi complexity and it's all automatic. You are never presented the choice of annex a or not with cisco gateways.

However, if you're using SIP, there are special cases:

http://www.cisco.com/en/US/docs/ios/12_2t/12_2t11/feature/guide/ftcodec.html

As an appreciation to those providing answers, please rate useful posts with the scrollbox below!

3 REPLIES
Hall of Fame Super Gold

Re: Cannot configure codec g729a & g729ab in Cisco AS5350XM

Hi, g.729a is an alternative algorithm and doesn't change compressed format, so is compatible and transparent for use with a non-a endpoint.

You choose which one is actually used with "codec complexity".

G.729b is the variation with embedded vad and would run as g.729ab depending on the codec complexity as above.

Hope this helps, please rate post if it does!

New Member

Re: Cannot configure codec g729a & g729ab in Cisco AS5350XM

What do u mean by codec compelxity? I cannot choose or configured any of that either high or medium in the voice gateway. How to achieve that?

Hall of Fame Super Gold

Re: Cannot configure codec g729a & g729ab in Cisco AS5350XM

In some models you configure that under voice-cards. Others support flexi complexity and it's all automatic. You are never presented the choice of annex a or not with cisco gateways.

However, if you're using SIP, there are special cases:

http://www.cisco.com/en/US/docs/ios/12_2t/12_2t11/feature/guide/ftcodec.html

As an appreciation to those providing answers, please rate useful posts with the scrollbox below!

256
Views
0
Helpful
3
Replies