I guess you are missing relating time schedules with partitions.
As you know, any pattern including DN, hunt pilot etc. must be in a partition -even in partition none-; if you relate a partition with a time schedule then during this period that partition become active and so the patttern lying in that partition are subject to digit analysis process according to the digits user has dialed.
CCO link: [about how to build a relation between partitions and time schedules]
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...