cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
399
Views
0
Helpful
6
Replies

Change point to point into point to multi point

hotrot_net
Level 1
Level 1

I'm new to the UC500 and don't know how to set the voice from point to point into point to multi point, i'm using KPN euro ISDN multi point ? can some one help me out?

6 Replies 6

paolo bevilacqua
Hall of Fame
Hall of Fame

By default, the ISDN BRI is set for multipoint. In this case is recommended that you use "isdn tei-negotiation preserve" under BRI interface.

If you want point-to-point, use "isdn static-tei 0".

Hope this helps, please rate post if it does!

Dear p.bevilacqua,

I do question that, i use a not multi isdn and than it's working when i do use the multi isdn it's not working.

Thanx andy

Which exact IOS are you using ?

I don't know at the moment. I'm not at the location where the UC500 is placed. Didn't set SSH open for i-net at the moment so can't login remote.

Why is there a trouble with older ones?

You need to run 12.4(11)XW5, previous ones are buggy.

Thanx for the info i'll try it tommorow

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: