CISCO 3825 ANONYMOUS CLID pickup up trunk rather than dial
CALL flow SIP------->T1(voice port)
when call has any letter in the FROM: field instead of making the call the cisco pickup trunk from one of the voice channels and gives dial tone then customer can dial number. This is big issue since once the dial tone is provided the call can be made to any destination without any record.
Is there a way to have the cisco properly handle a call with a LETTER or CHARACTER for
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...