I'm using SER as SIP Proxy, ATA186 and AS5350 as PSTN gateway.
I'm having an issue with ATA186. When I make a call, and I hang up before the other side picks up the call, the other side still ringing. Then AS5350 don't release the channel used in AS5350, so at the end of the day there is no channels available.
The point is ATA186 sends Cancel with AS5350's ip addres into sip message to SIP Proxy when I hang up, so Sip Proxy discards the package since the ip address into the sip message is not its ip adress.
I'm using SIP image v3.2.1 (the last version a.f.a.i.k.).
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...