Cisco Calling Card Application; Card Number Authentication Issue
I am using AS5350 for my calling card application using Clear Box as my RADIUS Server for AAA. My question now, how would I know if cisco is sending the dtmf for "enter card number.au" on the RADIUS server ? I issue a debug aaa authentication, but I didn't see any debug information. I only see it using debug voip ivr state. Does the card number included on the VSA ? below are my configurations.
aaa authentication login default local
aaa authentication login h323 group radius
aaa authorization exec h323 group radius
aaa accounting connection h323 start-stop group radius
1. Introduction Internet security is important with the increasing
attacks that are happening every day. Many internet and browsing
security solutions exist, but some are not very easy to use or maybe the
question is how can I enable them? In this referen...
Cisco Software Manager Server API Guide This document describes the
programmatic interfaces, RESTful APIs, which are supported by Cisco
Software Manager Server (CSM Server). Overview CSM Server supports a set
of finite RESTful APIs. The first step to use ...
If you are using Cisco's new linux-based Cisco Software Manager server,
then you probably want to make sure there is a startup service for
it.I'll assume that you've already installed the CSM server on a
systemd-based linux system. The commands given belo...