I've got a Cisco IP phone 7962 which i've upgraded to App Load ID "jar42sip.9-3-1TH2-5.sbin"
Everything was working with IPV4 network, but i'm trying to use it with IPV6, i'm able to configure the IPV6 address manually on the Network Configuration of the phone but not able to configure SIP proxy/Phone Number etc (Edit button is not coming in this case).
Device-configuration----->SIP Configuration---->SIP General Configuration (not able to edit anything here)??
Can you please let me knwo what exactly is the way to do it ? where to configure Proxy and how.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...