Just wondering if anyone knows of a performance counter for Unified Comm Manager that would allow me to get the maximum number of simultaneous calls that ever occured on any given trunk (SIP trunk specifically).
Something very similar to Cisco MOH Device "MOHHighest Active Resources", but for trunks.
MaxServingCount - This counter represents the maximum number of client connections that the TFTP can serve simultaneously. The Cisco TFTP advanced service parameter, Maximum Serving Count, sets this value.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...