Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME 7.x and FAX on VIC/FXS

Hi, Trying to set up a FAX machine on a 2851 with a VIC/FXS card. It works fine to dial out from the FAX Machine but when I try to dial in it does not work. The EPhone for the FXS card need a MAC adress and i can't find it.

phone 1

device-security-mode none

mac-address xxx.xxx.xxxx

username "FAX"

type anl

button 1:1

Anyone?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: CME 7.x and FAX on VIC/FXS

You don't need ephone for a fax under FXS. Just configure a pots dial-peer with number and port.

2 REPLIES
Hall of Fame Super Gold

Re: CME 7.x and FAX on VIC/FXS

You don't need ephone for a fax under FXS. Just configure a pots dial-peer with number and port.

New Member

Re: CME 7.x and FAX on VIC/FXS

Thank you. That was easy.

!Internal number 740

!Analog fax machine

dial-peer voice 740 pots

destination-pattern 740

port 0/0/0

265
Views
0
Helpful
2
Replies
CreatePlease to create content