Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME / Call Blocking with COR-Lists

Hi!

I created an (outgoing) dial-peer with destination pattern 0900 incl. cor-list.

If no cor-list (incoming) is set to an incoming dial-peer (dn) used by an ephone -> the ephone can use any outgoing dial-peer, without any restrictions, right?

Is it possible to set any kind of global rule for sip/ephones/fxs ports to be sure, the outgoing cor at die outgoing dial-peer matches for every incoming dial-peer?

1 REPLY
Hall of Fame Super Gold

Re: CME / Call Blocking with COR-Lists

Hi peter,

When incoming DP has no COR, but outgoing has one, the call succeeds. Please see a table with all combinations:

http://cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml

I do not quite understand your second question, but if you want an easy way to set or change COR for all the phones, you can use ephone-dn-template.

Hope this helps, please rate all useful posts using the scrollbox below!

180
Views
0
Helpful
1
Replies
CreatePlease to create content