Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

CME trunk to CCM 7.0

we are in process of opening another office and want to place CME  there and trunk it back to our HQ office which is running CCM 7.0.  I would like some feedback from anyone who has a similar setup. What problems have occured? What do I need to be aware of? any other advice you have to offer.

1 REPLY

Re: CME trunk to CCM 7.0

Hello,

I always use H.323 for IP trunking. Configuration is simple and no problems.

In case you don't have and want to read about integration:

Interoperability of Unified CM and Unified CM Express

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/callpros.html#wp1044453

Integrating Cisco Unified CallManager Express with Cisco Unified CallManager

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/intcmecm.html

Hope it helps, please rate if it helps.

Kind regards,

- Adrian.

465
Views
0
Helpful
1
Replies
CreatePlease to create content