Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME with X-lite softphone

Has anyone had any luck configuring CME 4.0 to work with the X-lite softphone?

6 REPLIES
Hall of Fame Super Gold

Re: CME with X-lite softphone

Works fine. To register the phone, configure username (same as extension number) and password under "voice register pool XX". You will need to specify a mac-adress that in reality doesn't matter and can be all zeros. In X-lite check the box "register with server" and choose "send outbound via proxy" with CME address.

Hope this helps, please rate post if it does!

Re: CME with X-lite softphone

I was trying to configure SPA942 with CME 4.1 for several hours with no success and now I find your great post.

I tried your advise and configure username as extension number. And now it's all working! Thx! (+5pts)

New Member

Re: CME with X-lite softphone

Excellent Paolo :-)

Re: CME with X-lite softphone

Palo

Thanks for sharing. My rating is 5 !.

Regards

Lavanya

New Member

CME with X-lite softphone

Palo!!

Thanks, for the Info.. finally I Have my Sip client working........

Regards,

Danny

New Member

Excellent Paolo :

Excellent Paolo :

4771
Views
15
Helpful
6
Replies
CreatePlease to create content