I was working with Microsoft products previously and now I have changed my mind to switch to cisco networks. My company has decided to go with VOIP SOLUTION as our branches are connected with MPLS network. The project given to me is this way. I have to connect 2 sites which includes my head office and branch office to use voip (both the branches are already connected using MPLS network). My head office is having a PBX which will be integrated with voip and my branch office is not having any kind of PBX system.
Note: It will be a pilot project so please suggest a cheap hardware only for 2 sites if its approved then we will be buy good router in our head office to connect all other branches.
1) What kind of cisco routers shall I buy for both Sites ?
2) what kind of modules shall be intalled in them to start ?
3) What kind of IOS ?
4) Do I need to do something in my PBX ? for the integration in my head office ?
5) Which books do you prefer as a beginner ?
I hope the above mentioned scenario is completely transparent by any chance if you feel that i havent provided you the complete information dont hesitate to ask. Your earliest response will be appreciated.
I would do this with two 2801, CCME feature, and cisco IP phones of your choice. What interface does the PBX have ? If doesn't have ISDN BRI or PRI, it will be hard to do a nice integration. Please search "CME" on CCO and start reading about it.
Note: it is fundamental that you locate a reputable cisco reseller that can help you with the prices and availability of the material, if not with the actual configuration.
1. Introduction Internet security is important with the increasing
attacks that are happening every day. Many internet and browsing
security solutions exist, but some are not very easy to use or maybe the
question is how can I enable them? In this referen...
Cisco Software Manager Server API Guide This document describes the
programmatic interfaces, RESTful APIs, which are supported by Cisco
Software Manager Server (CSM Server). Overview CSM Server supports a set
of finite RESTful APIs. The first step to use ...
If you are using Cisco's new linux-based Cisco Software Manager server,
then you probably want to make sure there is a startup service for
it.I'll assume that you've already installed the CSM server on a
systemd-based linux system. The commands given belo...