I have two small office with Panasonic KXTa624 analog key system installed in each. What type of voice port do i need for interconnecting these two system so that extension in one office can dial extensions in other office over IP? Thank you.
KXTa624 will act as PBX in your case. I think its has FXO ports which connects to the analog line from PSTN. So you can connect that with 2600 router with 4 port FXS card (2 module of 2 port fxs card) at each site. So the diagram will look like following
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...