Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

connection plar on voice T-1 channels?

Hi,

can you do connection plar on t-1 voice channels.

we have a scenerio where we need to be able to pass calls from unique T-1 voice channels to unique extensions in a remote site.

thanks in advance

2 REPLIES
Silver

Re: connection plar on voice T-1 channels?

If you are configuring CAS, you can configure a separate ds0 group for each timeslot, which will in turn create a separate voice port for each time slot and you can plar the voice port to a differnt extension, so in effect each timeslot will be plarred to a separate extension.

Taimoor

New Member

Re: connection plar on voice T-1 channels?

thanks, that makes sense!

so it should look something like this?

-----------------------------

Controller t1 1/0

ds0-group 0 timeslots 1 type fxo-loopstart

ds0-group 1 timeslots 2 type fxo-loopstart

ds0-group 2 timeslots 3 type fxo-loopstart

.

.

.

ds0-group 23 timeslots 24 type fxo-loopstart

!

!

voice-port 1/0:0

connection plar 100

!

voice-port 1/0:1

connection plar 101

!

!

dial-peer voice 100 pots

destination-pattern 100

port 1/0:0

!

dial-peer voice 101 pots

destination-pattern 101

port 1/0:1

Thanks

159
Views
0
Helpful
2
Replies
CreatePlease login to create content