08-06-2003 06:11 AM
Hi,
can you do connection plar on t-1 voice channels.
we have a scenerio where we need to be able to pass calls from unique T-1 voice channels to unique extensions in a remote site.
thanks in advance
08-06-2003 11:42 AM
If you are configuring CAS, you can configure a separate ds0 group for each timeslot, which will in turn create a separate voice port for each time slot and you can plar the voice port to a differnt extension, so in effect each timeslot will be plarred to a separate extension.
Taimoor
08-07-2003 12:12 PM
thanks, that makes sense!
so it should look something like this?
-----------------------------
Controller t1 1/0
ds0-group 0 timeslots 1 type fxo-loopstart
ds0-group 1 timeslots 2 type fxo-loopstart
ds0-group 2 timeslots 3 type fxo-loopstart
.
.
.
ds0-group 23 timeslots 24 type fxo-loopstart
!
!
voice-port 1/0:0
connection plar 100
!
voice-port 1/0:1
connection plar 101
!
!
dial-peer voice 100 pots
destination-pattern 100
port 1/0:0
!
dial-peer voice 101 pots
destination-pattern 101
port 1/0:1
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: