Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Data and Voice configuration on a switchport

Greeting,

What is the best configuration on the switchport for data and voice. The configuration will for a cat4500. Thank you

4 REPLIES

Re: Data and Voice configuration on a switchport

In general, you seperate the traffic using VLANs - one VLAN for data, one voice voice. Take a look at the following link for a configuration example.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/20ewa/configuration/guide/voice.html#wp1044179

Hope this helps.

Brandon

New Member

Re: Data and Voice configuration on a switchport

thanks for replying, I do understand that I need two separate vlans for data and voice. Do I have to spesify the native vlan?, does the port have to a trunk port? Thank you.

Re: Data and Voice configuration on a switchport

If not specified the access vlan will be 1. If it is something different in your environment, you will need to specify it using "switchport access vlan x". You do not need to specifically configure a trunk. In the case of an IP phone the trunk is negotiated automatically.

Hope this helps.

Brandon

New Member

Re: Data and Voice configuration on a switchport

Thank you for your help

154
Views
5
Helpful
4
Replies
CreatePlease to create content