Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

debug infor about FXO port

I have a debug information showed by command"debug vpm all"about FXO port.I can't distinguish the error in the information. who can tell me how to find out the error?

Thanks.

debug infor:

3d18h: ccIFShowState (vdbPtr=0x62F47D14, summary)

3d18h: ccIFShowState (vdbPtr=0x62F49994, summary)

3d18h: htsp_dsp_message: SEND/RESP_SIG_STATUS: state=0x0 timestamp=48919 systim8

3d18h: htsp_process_event: [3/0/0, FXOLS_ONHOOK, E_DSP_SIG_0000]fxols_onhook_rig

3d18h: [3/0/0] htsp_start_caller_id_rx

3d18h: [3/0/0] htsp_set_caller_id_rx:BELLCORE

3d18h: htsp_timer - 125 msec

3d18h: htsp_process_event: [3/0/0, FXOLS_WAIT_RING_MIN, E_HTSP_EVENT_TIMER]fxolr

3d18h: htsp_timer - 10000 msec

3d18h: htsp_dsp_message: SEND/RESP_SIG_STATUS: state=0x4 timestamp=49519 systim8

3d18h: htsp_process_event: [3/0/0, FXOLS_RINGING, E_DSP_SIG_0100]

3d18h: fxols_ringing_not

3d18h: htsp_timer_stop

3d18h: htsp_timer - 10000 msec

3d18h: [3/0/0] htsp_stop_caller_id_rx

3d18h: hdsprm_close_cleanup

3d18h: htsp_dsp_message: SEND/RESP_SIG_STATUS: state=0x0 timestamp=51819 systim8

3d18h: htsp_process_event: [3/0/0, FXOLS_RINGING, E_DSP_SIG_0000]

3d18h: htsp_dsp_message: SEND/RESP_SIG_STATUS: state=0x4 timestamp=52819 systim8

3d18h: htsp_process_event: [3/0/0, FXOLS_RINGING, E_DSP_SIG_0100]

3d18h: fxols_ringing_not

3d18h: htsp_timer_stop htsp_setup_ind

3d18h: [3/0/0] get_fxo_caller_id:Caller ID received. Message type=4 length=18 c3

3d18h: [3/0/0] Caller ID String 04 0F 30 37 31 38 31 35 35 31 35 32 36 33 39 33

3d18h: [3/0/0] get_fxo_caller_id calling num=5263932 calling name= calling time

3d18h: cc_api_call_setup_ind (vdbPtr=0x62F47D14, callInfo={called=8059,called_o)

3d18h: cc_api_call_setup_ind type 2 , prot 0

3d18h: cc_insert_call_entry: Increment call volume counter

3d18h: cc_insert_call_entry: current call volume: 1

3d18h: cc_insert_call_entry: entry's incoming TRUE. is_incoming is TRUE

3d18h: cc_incr_if_call_volume: not the VoIP or MMoIP

3d18h: htsp_process_event: [3/0/0, FXOLS_WAIT_SETUP_ACK, E_HTSP_SETUP_ACK]

3d18h: fxols_wait_setup_ack:

3d18h: [3/0/0] set signal state = 0xC timestamp = 0

3d18h: dsp_set_sig_state: [3/0/0] packet_len=12 channel_id=128 packet_id=39 sta0

3d18h: dsp_soutput: [3/0/0]fxols_check_auto_call

3d18h: cc_process_call_setup_ind (event=0x62ED923C)

3d18h: >>>>CCAPI handed cid 25 with tag 200 to app "DEFAULT"

3d18h: sess_appl: ev(24=CC_EV_CALL_SETUP_IND), cid(25), disp(0)

3d18h: sess_appl: ev(SSA_EV_CALL_SETUP_IND), cid(25), disp(0)

3d18h: ssaCallSetupInd

3d18h: ccCallSetContext (callID=0x19, context=0x631FB148)

3d18h: ssaCallSetupInd cid(25), st(SSA_CS_MAPPING),oldst(0), ev(24)ev->e.evCall1

3d18h: ssaCallSetupInd finalDest cllng(5263932), clled(8059)

3d18h: ssaCallSetupInd cid(25), st(SSA_CS_CALL_SETTING),oldst(0), ev(24)dpMatch0

3d18h: ssaSetupPeer cid(25) peer list: tag(100) called number (8059)

3d18h: ssaSetupPeer cid(25), destPat(8059), matched(4), prefix(), peer(62A8DF54)

3d18h: ccCallProceeding (callID=0x19, prog_ind=0x0)

3d18h: ccCallSetupRequest (Inbound call = 0x19, outbound peer =100, dest=, para1

3d18h: ccCallSetupRequest numbering_type 0x81

3d18h: ccCallSetupRequest encapType 2 clid_restrict_disable 1 null_orig_clg 0 c2

3d18h: dest pattern 8059, called 8059, digit_strip 0

3d18h: callingNumber=5263932, calledNumber=8059, redirectNumber= display_info= 0

3d18h: accountNumber=, finalDestFlag=1,

guid=7ea5.51a9.17e5.11cc.8034.e670.5153.4d65

3d18h: peer_tag=100

3d18h: ccIFCallSetupRequestPrivate: (vdbPtr=0x62CDA89C, dest=, callParams={call1

3d18h: ccIFCallSetupRequestPrivate: (vdbPtr=0x62CDA89C, dest=, callParams={call)

3d18h: cc_insert_call_entry: not incoming entry

3d18h: cc_insert_call_entry: entry's incoming FALSE. is_incoming is FALSE

3d18h: ccSaveDialpeerTag (callID=0x19, dialpeer_tag=0x64)

3d18h: ccCallSetContext (callID=0x1A, context=0x631FB6BC)

3d18h: ccCallReportDigits (callID=0x19, enable=0x0)

3d18h: cc_api_call_report_digits_done (vdbPtr=0x62F47D14, callID=0x19, disp=0)

3d18h: sess_appl: ev(52=CC_EV_CALL_REPORT_DIGITS_DONE), cid(25), disp(0)

oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(1)fDest(1)

3d18h: -cid2(26)st2(SSA_CS_CALL_SETTING)oldst2(SSA_CS_MAPPING)

3d18h: ssaReportDigitsDone cid(25) peer list: (empty)

3d18h: ssaReportDigitsDone callid=25 Reporting disabled.

3d18h: htsp_process_event: [3/0/0, FXOLS_PROCEEDING, E_HTSP_PROCEEDING]fxols_ofc

3d18h: htsp_timer - 120000 msec

3d18h: cc_api_supported_data data_mode=0x10002

3d18h: cc_incr_if_call_volume: remote IP is x.x.x.x

3d18h: cc_incr_if_call_volume: hwidb is Serial1/0:0

3d18h: cc_incr_if_call_volume: create entry in list: 1

3d18h: ccTDUtilGetInstanceCount: For tagID[1] of callID[26]

3d18h: ccTDPvtProfileTableObjectAccessManager: No profileTable set for callID[2]

3d18h: ccTDUtilGetInstanceCount: For tagID[2] of callID[26]

3d18h: ccTDPvtProfileTableObjectAccessManager: No profileTable set for callID[2]

3d18h: htsp_dsp_message: SEND/RESP_SIG_STATUS: state=0xC timestamp=53222 systim8

3d18h: htsp_process_event: [3/0/0, FXOLS_PROCEEDING, E_DSP_SIG_1100]fxols_offhoc

3d18h: htsp_timer2 - 350 msec

3d18h: cc_api_call_proceeding(vdbPtr=0x62CDA89C, callID=0x1A,

prog_ind=0x0, rawmsgPtr=0x0)

3d18h: sess_appl: ev(21=CC_EV_CALL_PROCEEDING), cid(26), disp(0)

3d18h: cid(26)st(SSA_CS_CALL_SETTING)ev(SSA_EV_CALL_PROCEEDING)

oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(0)fDest(0)

3d18h: -cid2(25)st2(SSA_CS_CALL_SETTING)oldst2(SSA_CS_CALL_SETTING)

3d18h: ssaCallProc

3d18h: ccGetDialpeerTag (callID=0x19)

3d18h: ssaIgnore cid(26), st(SSA_CS_CALL_SETTING),oldst(1), ev(21)

3d18h: cc_api_call_alert(vdbPtr=0x62CDA89C, callID=0x1A, prog_ind=0x0, sig_ind=)

3d18h: sess_appl: ev(7=CC_EV_CALL_ALERT), cid(26), disp(0)

3d18h: cid(26)st(SSA_CS_CALL_SETTING)ev(SSA_EV_CALL_ALERT)

oldst(SSA_CS_CALL_SETTING)cfid(-1)csize(0)in(0)fDest(0)

3d18h: -cid2(25)st2(SSA_CS_CALL_SETTING)oldst2(SSA_CS_CALL_SETTING)

3d18h: ssaAlert

3d18h: ccGetDialpeerTag (callID=0x19)

3d18h: ccCallAlert (callID=0x19, prog_ind=0x0, sig_ind=0x1)htsp_alert_notify

3d18h: htsp_process_event: [3/0/0, FXOLS_PROCEEDING, E_HTSP_EVENT_TIMER2]fxols_m

3d18h: htsp_timer_stop

3d18h: htsp_timer_stop2

3d18h: cc_api_call_disconnected(vdbPtr=0x62F47D14, callID=0x19, cause=0x10)

3d18h: sess_appl: ev(11=CC_EV_CALL_DISCONNECTED), cid(25), disp(0)

3d18h: cid(25)st(SSA_CS_ALERT_RCVD)ev(SSA_EV_CALL_DISCONNECTED)

oldst(SSA_CS_CALL_SETTING)cfid(-1)csize(0)in(1)fDest(1)

3d18h: -cid2(26)st2(SSA_CS_ALERT_RCVD)oldst2(SSA_CS_CALL_SETTING)

3d18h: ssaDiscSetting

3d18h: ssaFlushPeerTagQueue cid(25) peer list: (empty)

3d18h: ssa: Disconnected cid(25) state(17) cause(0x10)

3d18h: ccCallDisconnect (callID=0x19, cause=0x10 tag=0x0)

3d18h: cc_api_get_transfer_info: (callID=0x19)

3d18h: ccCallDisconnect (callID=0x1A, cause=0x10 tag=0x0)

bazhong#sh voice call su

PORT CODEC VAD VTSP STATE VPM STATE

============ ======== === ==================== ======================

3/0/0 None y S_SETUP_IND_PEND FXOLS_RINGING

3/0/1 - - - FXOLS_ONHOOK

Sincerely

2 REPLIES
Silver

Re: debug infor about FXO port

there does not seem to be an error. it seems that the call was in alerting state, the phone was possibly ringing and the originating party dropped the call.

It is also helpful to turn on

service timestamps debug date msec

for milisecond debugging.

New Member

Re: debug infor about FXO port

I just received the response from customer engineer about the issue that the problem is the IVR cannot make the correct response to the call from the branch office. the originated caller only hear the normal ring, but can't hear the IVR replied sound just like" welcome to xxx company". Could u tell me how to make the right troubleshooting to solve the problem? I have a question that whether the call can arrive the network gateway correctly, but can't be transferred to the call manager gateway correctly. Wait for your help. Thanks

Sincerely

2852
Views
0
Helpful
2
Replies
CreatePlease to create content