our customer opens a Call center with Nortel CS1000 ACD, and PBX. They want to integrate voip with this equipments and propose Nortel Passport 8610 switch as the core switch for voip, and data. Can Cisco Cat 6509 fits into this and replace the Nortel Passport instead?
The 8600 will jsut be a L2/L3 switch. You should be able to use the 6500 to do that funcionality also. You will jus thave to configure QOS on it. You can also configure the 6500 with AF power blades and pwer the phones.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...