Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Design Basic E1-SS7

i need to connect 2 E1-r2 in SS7 between a operator and a telco, could you bring me a basic design about that, what appliances will be needed?

1 REPLY
Cisco Employee

Re: Design Basic E1-SS7

Hi,

You will need PGW and 5350 for ss7 running in nailed mode. 5350 can run integrated slt that connects to ss7 network. The rest are used for bearer channels. You can run voip(either h.323 or sip) between 5350 and another 5350 gateway that is doing r2 signaling to the r2 carrier.

http://www.cisco.com/en/US/products/hw/vcallcon/ps2027/index.html

http://www.cisco.com/en/US/docs/ios/12_2t/12_2t11/feature/guide/ftintslt.html

168
Views
0
Helpful
1
Replies
CreatePlease to create content