Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Dial-peer configuration

Hello,

Is there a way to group together multiple IPs under one dial-peer?

For example, 192.168.1.0/24

Instead of creating a separate dial peer for each IP within the Class C, is it possible to group them together into one dial peer? This is for inbound dial peer voice and pots configuration.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Dial-peer configuration

For inbound voip DP, it is not necessary to specify any address.

For inbound pots DP, IP does not apply at all.

What problem are you trying to solve ?

2 REPLIES
Hall of Fame Super Gold

Re: Dial-peer configuration

For inbound voip DP, it is not necessary to specify any address.

For inbound pots DP, IP does not apply at all.

What problem are you trying to solve ?

Cisco Employee

Re: Dial-peer configuration

Inbound side doesnt care for IP addr, just specify the incoming called number, session protocol, codec, dtmf-relay, and any other specific parameter.

195
Views
5
Helpful
2
Replies
CreatePlease login to create content