Does Cisco 2911 voice routers work with cisco SPA 514G phones
We want to deploy a Cisco 2911 voice router but looking for cheap phones with two Giga bit ethernet ports (one to the switch and the other to computer) that has a display and user friendly. I want to know if the cisco SPA 514G will work with it?
I am having "Error: spcp register token rejected 514G"
I am trying to provision 3 spa514G phones to Cisco UC540 with CME. However I am unable to have them registered.
I have a spa508G that works fine, as there seems to be loads for spa50X versions, not for spa51x.
Please advice, I downloaded the .bin file for spa51x, however, when I run the telephony service > load 514G firmware, it does not work, if I use load ? >> it lists a bunch of devices but it does not list the 514G
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...