Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Error when trying to configure QOS on interface

Folks,

I received this error when trying to configure service policy out from interface.

Router(config)#int fa3/4

Router(config-if)#service-policy output SETDSCP

QoS: FastEthernet3/4 doesn't support policy SETDSCP for class VOICE in Out direction

router(config-if)#

3 REPLIES
New Member

Re: Error when trying to configure QOS on interface

Can you share the class-map and policy-map config?

Cisco Employee

Re: Error when trying to configure QOS on interface

This message is thrown if the policy is not supported in out direction.

Can you let us know which platform it is?. Also it would be better if you can paste the policy-map, class-map config.

Regards,

Nagendra

Cisco Employee

Re: Error when trying to configure QOS on interface

Could be related to this -

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/qos.html#wp1720400

Policers can act on ingress traffic per-port or per-VLAN. With a PFC3, for egress traffic, the policers can act per-VLAN only

You will have to give us a bit more information about platform/IOS versions etc ... if you want a more detailed answer.

187
Views
0
Helpful
3
Replies
CreatePlease to create content