Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Fax Detection

Hello,

I wanted to know if its possible to detect a fax call from PSTN and direct it to a particular voip dial-peer.

Any info is appreciated..

3 REPLIES

Re: Fax Detection

You can create a voip dial-peer with your fax number in the destination-pattern. For example:

dial-peer voice 555 voip

destination-pattern 5551234

...

where 5551234 is your fax number.

New Member

Re: Fax Detection

No the issue is that its just not one fax number, I need to be able to detect a fax incoming call and pick one outbound dial-peer for all the fax calls.

Bronze

Re: Fax Detection

This TCL script plays a prompt to the caller and apprently then makes a routing deciscion. I'm assuming you want automatic detection, but this is better than nothing.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide_chapter09186a00800b5dc4.html

I'm not aware of any way to detect the call type in the dial-peer or global commands. It certainly would be a nice feature.

220
Views
0
Helpful
3
Replies