cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
998
Views
0
Helpful
2
Replies

force device out dial-peer

zorric.sia
Level 1
Level 1

Hello All,

We have (2) SIP trunks, one for long-distance and one for local calls. Our LD provider does not support faxing so i must force fax traffic to our local SIP trunk. I tried using answer-address and preference but it didn't work. Fax machines are connected to ATA boxes. Relevant config is below, please advise.

ephone-dn  32  dual-line

number 2032

description FAX 2032

name FAX 2032

!

ephone  32

device-security-mode none

mac-address 0019.E8AE.8702

max-calls-per-button 2

type ata

button  1:32

!

dial-peer voice 1000 voip

description LD_OUTBOUND

translation-profile incoming 2

translation-profile outgoing 1

destination-pattern ..........

session protocol sipv2

session target ipv4:LD_SIP

  incoming called-number .T

voice-class codec 1 

dtmf-relay rtp-nte

no vad

!

dial-peer voice 995 voip

description LOCAL_OUTBOUND

translation-profile outgoing 4

answer-address 2032

session protocol sipv2

session target dns:LOCAL_SIP

voice-class codec 1 

dtmf-relay rtp-nte

no vad

Thanks in advance.

2 Replies 2

Add the output of the command

debug voip dialpeer all.

Try to remove destination-pattern to dial-peer 1000.

Regards.

etamminga
Spotlight
Spotlight

You van use cor-lists to prevent the fax dn to see the LD dial peer.

So, have a look at cor-lists on CCO.

Regards,

Erik

Sent from Cisco Technical Support iPad App