Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

FXO release problem with connection plar

hi all.

I have 4 lines to the PSTN connected to a FXO card, the problem is when somebody in the PSTN call and hung before they answer the IP phone, the IP phone continuous ringing and the FXO port is not released, to stop ringing and release the port, in need to off-hook the IP Phone

The problem is when I configure connection plar to a IP Phone, without connection plar the FXO port ir release correctly.

the FXO card is a VIC2-4FXO

the voice-port configuration is:

voice-port 0/1/0

timeouts call-disconnect 1

timeouts ringing 30

timeouts wait-release 1

connection plar 1202

!

voice-port 0/1/1

timeouts call-disconnect 1

timeouts ringing 30

timeouts wait-release 1

connection plar 1202

!

voice-port 0/1/2

timeouts call-disconnect 1

timeouts ringing 30

timeouts wait-release 1

connection plar 1205

!

voice-port 0/1/3

timeouts call-disconnect 1

timeouts ringing 30

timeouts wait-release 1

connection plar 1205

2 REPLIES
Bronze

Re: FXO release problem with connection plar

Can you change "connection plar" to "connectin plar opx" and then perform shut/no shut and then try again?

Let me know how that goes.

New Member

Re: FXO release problem with connection plar

thanks

The "connection plar opx", resolve the problem

great aid

384
Views
5
Helpful
2
Replies