Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Gatekeeper Drop First Digit

Hi

I have a gatekeeper with multilple CCM registered and also Multiple PSTN gateways.

When a call to the PSTN is dialed it is prefixed with a 9 but the plans on the gatekeeper dont have a 9 as on inbound calls there is no 9.

Is there a way i can drop the 9 on calls from the CCM when the gatekeeper decides where to route the call without having 2 copies of the number?

example of my zone prefix. It does not match the call outbound as there is no 9, but i need the 9 to be there when it hits the other gateway.

zone prefix gk-ht-zn-ccm-01 0845123222* gw-priority 10 N4-DRY-HOST-VGW-RL_1 N4-DRY-HOST-VGW-RL_2

Thanks

Andy

1 REPLY

Re: Gatekeeper Drop First Digit

Hi Andy,

Unfortunately, gatekeepers don't manipulate digits - they basic just resolve phone numbers to IP address.

You'll need to translate the dialed number on the inbound voip leg dial-peer of the gateway.

HTH,

Michael

158
Views
0
Helpful
1
Replies
CreatePlease login to create content