Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Gateway H323

Hi,

At Headquarters there is a CCM 5.1 and at branch office there is a Panasonic with h.323 support.

In Both site there is a gateway router 2811 registering with callmanager.

I can't call from CCM to Panasonic and each other, but if I use the command "csim start" by CLI the call procedure ok.

this is router debug

Result=Success(0) after DP_MATCH_INCOMING_DNIS; Incoming Dial-peer=1800

021294: Nov 4 12:11:19.682: //-1/80E27ED96204/DPM/dpAssociateIncomingPeerSPI:exit@6090

021295: Nov 4 12:11:19.682: //11973/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:

Call Entry Is Not Found

021296: Nov 4 12:11:19.682: //-1/80E27ED96204/CCAPI/cc_api_display_ie_subfields:

cc_api_call_setup_ind_common:

cisco-username=Marcos Meirelles

----- ccCallInfo IE subfields -----

cisco-ani=1530

cisco-anitype=0

cisco-aniplan=1

cisco-anipi=0

cisco-anisi=1

dest=1803

cisco-desttype=0

cisco-destplan=0

cisco-rdie=FFFFFFFF

cisco-rdn=

cisco-rdntype=-1

cisco-rdnplan=-1

cisco-rdnpi=-1

cisco-rdnsi=-1

cisco-redirectreason=-1 fwd_final_type =0

final_redirectNumber =

hunt_group_timeout =0

021297: Nov 4 12:11:19.686: //-1/80E27ED96204/CCAPI/cc_api_call_setup_ind_common:

Interface=0x47A14098, Call Info(

Calling Number=1530,(Calling Name=)(TON=Unknown, NPI=ISDN, Screening=User, Passed, Presentation=Allowed),

Called Number=1803(TON=Unknown, NPI=Unknown),

Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE,

Incoming Dial-peer=1800, Progress Indication=NULL(0), Calling IE Present=TRUE,

Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=11973

021298: Nov 4 12:11:19.686: //-1/80E27ED96204/CCAPI/cc_api_call_setup_ind_common:

Interface Type=0, Protocol=1

021299: Nov 4 12:11:19.686: //-1/80E27ED96204/CCAPI/ccCheckClipClir:

In: Calling Number=1530(TON=Unknown, NPI=ISDN, Screening=User, Passed, Presentation=Allowed)

021300: Nov 4 12:11:19.686: //-1/80E27ED96204/CCAPI/ccCheckClipClir:

Result=Success(0); Outgoing Dial-peer=1800 Is Matched

021351: Nov 4

poa# 12:11:19.706: //-1/80E27ED96204/DPM/dpMatchPeersCore:

Result=Success(0) after DP_MATCH_DEST

021352: Nov 4 12:11:19.706: //-1/80E27ED96204/DPM/dpMatchPeersMoreArg:

Result=SUCCESS(0)

List of Matched Outgoing Dial-peer(s):

1: Dial-peer Tag=1800

021353: Nov 4 12:11:19.710: //11973/80E27ED96204/CCAPI/ccCallCanGateway:

CALL_ERROR_INFORMATIONAL; Gateway Is Not Allowed;

Incoming InterfaceType=1, Outgoing Interface Type=28, Call Id=0x2EC5

021354: Nov 4 12:11:19.710: //-1/xxxxxxxxxxxx/CCAPI/cc_update_feature_vsa:

021355: Nov 4 12:11:19.710: : updating existing feature vsa

021356: Nov 4 12:11:19.710: //-1/xxxxxxxxxxxx/CCAPI/cc_update_feature_vsa:

021357: Nov 4 12:11:19.710: feature call basic

021358: Nov 4 12:11:19.714: //11973/80E27ED96204/CCAPI/ccCallDisconnect:

Cause Value=3, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)

021359: Nov 4 12:11:19.714: //11973/80E27ED96204/CCAPI/ccCallDisconnect:

Start Calling Accounting;

Call Entry(Incoming=TRUE)

021360: Nov 4 12:11:19.714: //11973/80E27ED96204/CCAPI/ccCallDisconnect:

Cause Value=3, Call Entry(Disconnect Cause=0)

021361: Nov 4 12:11:19.714: //11973/80E27ED9620

1 REPLY

Re: Gateway H323

Have you checked your Calling Search Space setup on gateway configuration page?

1659
Views
0
Helpful
1
Replies
CreatePlease to create content