Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

GK CDRs

Hello,

I have put my GK in proxy mode based on a specific remote zone created on a remote GK ( my LOCAL zone is originating the call) in order to get reliable CDRs , the setup is functionning properly , but i have noticed , referring to call active record file of my GK, that for each call the duration in one of two call legs CDR still zero while the other call leg CDR returns the correct duration( similar to what i have on my end GW) .

Following is what i m seeing on my GK:

1B8B : 294301237hs.1 +-1 pid:0 Answer active

dur 00:00:00 tx:7952/274596 rx:9802/341736

Proxy x.x.x.x:17934,0,0,0,0,0 endpt: unknown/0

bw: 640/500 codec: g729/none tx: 7910/267960,0/0,0/0 rx: 9736/328136,0/0,0/0

1B8B : 294301238hs.1 +1229 pid:0 Originate 96417740638 active

dur 00:05:27 tx:9802/341736 rx:7952/274596

Proxy x.x.x.x:16672,0,0,0,0,0 endpt: gateway/0

bw: 640/500 codec: g729/none tx: 9736/328136,0/0,0/0 rx: 7910/267960,0/0,0/0

what i should do to get similar duration in both call leg ?

Any Thoughts,

Regards,

Jacob.

3 REPLIES
Silver

Re: GK CDRs

Is it by any chance hitting the known bug CSCdu59154 ? It might also be something to do with the synching configuration problem on the Proxy GK?

New Member

Re: GK CDRs

Hello,

Appologizes for delay,

what do you mean by synching configuration problem ?

my Proxy GK is a Cisco router 7206 VXR Series running 12.2(7b) Cisco IOS , is this IOS hitting by the bug CSCdu59154 mentioned ? how could i verify?

could you please elaborate on your reply ?

Regards,

Jacob.

New Member

Re: GK CDRs

Dear Jacob:

Could you please give me an example of how setup the proxy feature on a Cisco Gatekeeper ??? and where I can find more information regarding this feature on the Cisco WEB site.

Actually I get CDR records from a Gatekeeper without the proxy feature and I get duration only on the second call leg, but that it's good enough in order to get the call duration.

Regards,

Alberto

171
Views
0
Helpful
3
Replies
CreatePlease login to create content