Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

help on e/m cord

Dear sir,

iam having cisco 2821 router and VIC2-2E/M cord ,so plz give me some examples of configuration.

Thanks&Regards

srini

3 REPLIES
Cisco Employee

Re: help on e/m cord

Analogue E&M port wiring and configuration often depend on the device you are connection to. You will probably need to have your PBX details for the connection to work.

Refer here for some suggestions on how E&M ports work, the wiring details and some troubleshooting suggestions -

http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080093f5e.shtml

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_tech_note09186a008009452e.shtml

New Member

Re: help on e/m cord

I want to make models on call manager express, given patterns to wor

Cisco Employee

Re: help on e/m cord

I'm sorry , but I (and probably everyone else on the forum) have absolutely no idea what you want.

If you would like to make E&M cards work on a CME system, then you need to follow the cabling guide in the previous posting, and then configure your VOIP and POTS dial peers as you would on any other system.

If you need further assistance, you will have to give us more information :-)

169
Views
0
Helpful
3
Replies
CreatePlease to create content