Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to configure RADIUS for 12.2?

Cisco AS-5300

Cisco IOS Version 12.2(15)T7

What are the Cisco IOS statements needed to configure

the RADIUS service? I am NOT going to use it to

login into the router, instead, the Cisco will be

running a Tcl IVR call application which will

authenticate, authorize and do resource accounting

based on a remote RADIUS (from GNU) server.

I include below the configurations for Cisco IOS

versions 12.0, 12.1 and 11.1, taken from the O'Reilly

"RADIUS" book.

I need the configuration for IOS 12.2.

TIA,

-Ramon

---------------------------------------------------------------

For IOS Version 12.0 or 12.1:

aaa new-model

aaa authentication login default group radius local

aaa authentication login localauth local

aaa authentication ppp default if-needed group radius local

aaa authorization exec default group radius local

aaa authorization network default group radius local

aaa accounting delay-start

aaa accounting exec default start-stop group radius

aaa accounting network default start-stop group radius

aaa processes 6

---------------------------------------------------------------

For IOS Version 11.1

aaa new-model

aaa authentication ppp radppp if-needed radius

aaa authorization network radius none

aaa accounting network wait-start radius

aaa accounting network wait radius

radius-server timeout 3

---------------------------------------------------------------

2 REPLIES
New Member

Re: How to configure RADIUS for 12.2?

Hi try this on the aaa new model:

aaa accounting connection h323 start-stop group radius

then on global config:

radius-server host xx.xx.xx.xx auth-port 1645 acct-port 1650

radius-server key xxxxxxxxxx

radius-server authorization permit missing Service-Type

hop it will help

New Member

Re: How to configure RADIUS for 12.2?

aaa new-model

aaa authentication login default line

aaa authentication login h323 group radius

aaa authorization exec h323 group radius

aaa accounting connection h323 start-stop group radius

radius-server host x.x.x.x

radius-server key secret

radius-server vsa send accounting

radius-server vsa send authentication

167
Views
0
Helpful
2
Replies