Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to delete the mgcpapp service from FXO ports under the dial-peer.

Hello

Configuration as below :

dial-peer voice 1023 pots

service mgcpapp

port 0/2/3

According to the above configuration if I WANT TO delete a defined dial peer by using

# no dial-peer voice 1023 pots

It will also deleted the services and port 0/2/3 which are running under this dial-peer without any effect to other dial peer configuration at gateway. or else its enough this command to delete  the dial peer along .

Thanks i advance .

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: How to delete the mgcpapp service from FXO ports under the d

'no dial-peer voice 1023 pots' will remove the entire dial-peer, and all of it's sub-configuration.

If you just need to remove the 'service mgcpapp' config, 'default service' should do that.

-Steve

3 REPLIES
Cisco Employee

Re: How to delete the mgcpapp service from FXO ports under the d

'no dial-peer voice 1023 pots' will remove the entire dial-peer, and all of it's sub-configuration.

If you just need to remove the 'service mgcpapp' config, 'default service' should do that.

-Steve

New Member

Re: How to delete the mgcpapp service from FXO ports under the d

Hi Steven

Thanks for your helpful information.

I have one more question to clear . Presently iam working at CCM 5.0 with Administration Account . I would like to create CCM new account for new

trainee engineer with limited access i.e Standard CCM Phone Administration and Management only . like adding new  ip Phone change the existing user name and extension only

So please advice how to create an new CCM Account with the above limited Access.

Highly apprecited for your quick response .

Cisco Employee

Re: How to delete the mgcpapp service from FXO ports under the d

Hi Syed,


You can achieve your need by creating Roles & Usergroups under USERMANAGEMENT

Make use of the below document for step-by-step configuration

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_4/ccmcfg/b08role.html#wp1059943

731
Views
0
Helpful
3
Replies