How to kill a voip call via SNMP

[Deniz AYDIN]

is there anybody knows how to kill a voip call via snmp.And also get the active call number on ip to ip gw.

[mheusinger]

Well you can reload your voice gateway through SNMP.

As this is NOT what you want I am ssuming, please give more details about your scenario, which devices are involved, what is the problem etc.

Regards

Martin

[Deniz AYDIN]

Sure i dont wanna reload the rouer:).

I use an iptoip gw and wanna clear call via snmp.I dont remember the exact CLI command but the thing is that to kill a call you need the call ID shown with

show call active voice brief, and i cant find the snmp oid for this.

show call active voice brief

2316 : 245852 1520129134ms.1 +23890 pid:6 Answer 00492363359433 active

dur 00:26:49 tx:0/0 rx:0/0

IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8

in the output the call ID is 2316.

[mheusinger]

Hi,

what you are looking for can hopefully be found in

"Equivalent MIB Objects for VoIP show Commands"

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a008048349c.shtml

Hope this helps

Martin

[Deniz AYDIN]

Hi I know this page.As you can see there is no SNMP OID for Call ID, thats the problem. May be there is another MIB for this but i cant find another usefull one. If you know another method that will also be usefull.

11D9 ?????? : 1102799(D1)hs.1 +1324 pid:2000(D2) Answer(D3) 2000(D4) active(D5)

dur 1d19h(D6) tx:7875641(D7)/157512782(D8) rx:7875955(D9)/157519081(D10)

Tele 2/0/0(D11):1: tx:157515460(D12)/157514630(D13)/0ms g729r8(D14)

noise:-56(D15) acom:5(D16) i/0:-40(D17)/-46(D18) dBm

Regards Deniz

[mheusinger]

Hi,

maybe

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1.3.6.1.4.1.9.9.63.1.3.2.1.1

or

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1.3.6.1.4.1.9.9.63.1.3.2.1

Should help you.

regards

Martin

[Deniz AYDIN]

Hi again,

I found the CLI command to clear a active voice call.

( clear call voice causecode 16 id !!! )

I know the oid you sent but its not the right id. It's global call id. So its not useable for this command. Do you know another method ?

if i found the correct oid, ı also have to find snmp euq. of the CLI command.

[jaregalado]

Hi

You can try writting a simple perl script and the Net::Telnet module to accomplish that, sometimes SMNP is not the best option available and you have to resort to other means such like this.

A related thread about Net::Telnet can be found here:

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Service%20Providers&topic=Voice%20over%20IP&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dda805d

Regards.

[vasiatmn_123]

For god's sake tell me what kind of cisco equipement and IOS you are using?

I need a way to clear voip calls and there is no suitable clear command for that on my AS5300 IOS 12.2(15)T14, and:

#clear call vo?

% Unrecognized command

[Deniz AYDIN]

It seems you ios is not supporting this command.My IOS version is 12.4.4T1.Try to upgrade ios.