Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Hunt Pilot transfer to voice mail

Trying to setup a Hunt Pilot for the Main line of a new school. I have it working but when all of the lists have been exhausted, how do I make it transfer to a voice mail box? I even tried forwarding all calls to voicemail and it stil comes back with a fast busy after the designated ring time.

CCM 4.1(3) sr4d

Unity 4.0(4) SR1

IP Phone CP7961G

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Red

Re: Hunt Pilot transfer to voice mail

Hi James,

This should be applied at the "Hunt Pilot" Level, if you configure a Destination # (DN of Unity VM Pilot) under the settings shown below, you should be good to go;

Hunt Forward Settings

Forward Hunt No Answer - When the call that is distributed through the hunt list is not answered in a specific time, this field specifies how to forward the call.

Destination This setting indicates the directory number to which calls are forwarded. (This can be the Directory Number of the Unity VM Pilot)

Forward Hunt Busy - When the call that is distributed through the hunt list is busy in a specific time, this field specifies how to forward the call.

Destination This setting indicates the directory number to which calls are forwarded. (This can be the Directory Number of the Unity VM Pilot)

Maximum Hunt Timer - Enter a value (in seconds) that specifies the maximum time for hunting.(Used in conjunction with Forward Hunt Busy)

From this good CCM 4.1.3 doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803ed664.html#wp1023973

Hope this helps!

Rob

Hall of Fame Super Red

Re: Hunt Pilot transfer to voice mail

Good stuff James! Glad to help :)

Good luck with the rest of your deployment,

Rob

Please remember to rate helpful posts.......

3 REPLIES
Hall of Fame Super Red

Re: Hunt Pilot transfer to voice mail

Hi James,

This should be applied at the "Hunt Pilot" Level, if you configure a Destination # (DN of Unity VM Pilot) under the settings shown below, you should be good to go;

Hunt Forward Settings

Forward Hunt No Answer - When the call that is distributed through the hunt list is not answered in a specific time, this field specifies how to forward the call.

Destination This setting indicates the directory number to which calls are forwarded. (This can be the Directory Number of the Unity VM Pilot)

Forward Hunt Busy - When the call that is distributed through the hunt list is busy in a specific time, this field specifies how to forward the call.

Destination This setting indicates the directory number to which calls are forwarded. (This can be the Directory Number of the Unity VM Pilot)

Maximum Hunt Timer - Enter a value (in seconds) that specifies the maximum time for hunting.(Used in conjunction with Forward Hunt Busy)

From this good CCM 4.1.3 doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803ed664.html#wp1023973

Hope this helps!

Rob

New Member

Re: Hunt Pilot transfer to voice mail

Worked like a charm.

Thanks.

Hall of Fame Super Red

Re: Hunt Pilot transfer to voice mail

Good stuff James! Glad to help :)

Good luck with the rest of your deployment,

Rob

Please remember to rate helpful posts.......

268
Views
0
Helpful
3
Replies