I am using an IAD2432 IAD (SIP to PRI). I have the following default RTCP setting in my config:
ip rtcp report interval 5000
ip rtcp sub-rtcp message-type 209
I understand the report interval but I do not actually see any VQ stats in any of the SIP messaging. I've also read a SIP PUBLISH may somehow be involved but I don't see that message either. Am I missing some configuration? How is RTCP reported in the signaling for a SIP device? How is everyone else doing this?
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...