Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Incoming call from PSTN to SIP softphone X-lite

Dears.

Sorry for my pitty english :D.

I have a Cisco 2811 with Cisco Callmanager Express, with two phone (ip communicator) running skinny protocol. I have also a client SIP running in my mobile telephone.

The problem is not posible when there is a incoming call (interface fxo) from any number of pstn redirect to SIP number extension. I dont know how to do.

Its like a connection plar?, or is diferent ?.

Please help me.

5 REPLIES

Re: Incoming call from PSTN to SIP softphone X-lite

A few things to try:

telephony-service

transfer-pattern ..

voice service voip

no supp sip moved ! try this first

no supp sip refer ! try this second

-nick

New Member

Re: Incoming call from PSTN to SIP softphone X-lite

thank you! i have just try your config but doesnt work :,,(

Its rare for me that connection plar command dont running to redirect to SIP extension. However in SCCP extension work fine.

Other way...

Re: Incoming call from PSTN to SIP softphone X-lite

can you post 'debug ccsip message' and 'debug vpm signal' in one file?

New Member

Re: Incoming call from PSTN to SIP softphone X-lite

Dear Nick!

You can see two attachaments.

The first file is all debug than you ask me, and the second file is a screenshot where you can see the error in my client sip (x-lite), however i can do call outsite with x-lite

I dont find the solution :,,,(

Best Regards!

Re: Incoming call from PSTN to SIP softphone X-lite

Hi Carlos,

No idea what's going on here with the x-lite. We're sending an invite to it, but then it just forwards the invite on to us. It is as if it doesn't know that it's DN is 10.

-nick

525
Views
0
Helpful
5
Replies