Integrating Voice and Data pri with MGCP

[VON CLAWSON]

I know this can be done with the following configuration:

controller T1 1/1

framing esf

linecode b8zs

channel-group 1 timeslots 1-12 speed 64

pri-group timeslots 13-24

However, I cannot seem to find documentation on it on www.cisco.com. Any help would be appreciated.

Thanks

Von

[VON CLAWSON]

Can anyone help me with this?

[paolo bevilacqua]

If you telco can provision that, there is no problem, MGCP won't even know what are the unused PRI timeslots for.

Hope this helps, please rate post if it does!

[VON CLAWSON]

right, I know that it will work. What I need is some official documentation indicating that it will work and is supported.

[paolo bevilacqua]

Cisco does so many things that is not that you can find confirmation about each and any variation in configuration.

What you want to do is really nothing special and works since some 10 years now. Some people calls it "integrated T1 access"

[rpeirce]

ATT calls it SINA Prime digital service.

controller T1 0/0/0

framing esf

linecode b8zs

channel-group 1 timeslots 1-12

ds0-group 2 timeslots 13-24 type e&m-wink-start dtmf dnis