Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Integrating Voice and Data pri with MGCP

I know this can be done with the following configuration:

controller T1 1/1

framing esf

linecode b8zs

channel-group 1 timeslots 1-12 speed 64

pri-group timeslots 13-24

However, I cannot seem to find documentation on it on www.cisco.com. Any help would be appreciated.

Thanks

Von

5 REPLIES
Community Member

Re: Integrating Voice and Data pri with MGCP

Can anyone help me with this?

Hall of Fame Super Gold

Re: Integrating Voice and Data pri with MGCP

If you telco can provision that, there is no problem, MGCP won't even know what are the unused PRI timeslots for.

Hope this helps, please rate post if it does!

Community Member

Re: Integrating Voice and Data pri with MGCP

right, I know that it will work. What I need is some official documentation indicating that it will work and is supported.

Hall of Fame Super Gold

Re: Integrating Voice and Data pri with MGCP

Cisco does so many things that is not that you can find confirmation about each and any variation in configuration.

What you want to do is really nothing special and works since some 10 years now. Some people calls it "integrated T1 access"

Community Member

Re: Integrating Voice and Data pri with MGCP

ATT calls it SINA Prime digital service.

controller T1 0/0/0

framing esf

linecode b8zs

channel-group 1 timeslots 1-12

ds0-group 2 timeslots 13-24 type e&m-wink-start dtmf dnis

174
Views
0
Helpful
5
Replies
CreatePlease to create content