Hi! I have as5300 with 60 DSP modules. It has several E1 ISDN connections to PSTN, and almost all calls from PSTN were routed through ip network to other cisco router. There is IVR application set up at one incoming number, that serves prepaid cards.
Then one day we have connected those two cisco's with E1 line, with ISDN over it. After that we have noticed a problem with IVR application - sometimes it gives ringing tones instead of playing prompt. But debug shows that IVR script is executed for that calls, and it even processes key presses! But all I hear is ringing tones. This problem is not persistant - some calls are processed just fine (prompts played, all ok), some calls receive ringing tones after cisco picks up.
There are no errors in logs, I don't know what to do.
1. Introduction Internet security is important with the increasing
attacks that are happening every day. Many internet and browsing
security solutions exist, but some are not very easy to use or maybe the
question is how can I enable them? In this referen...
Cisco Software Manager Server API Guide This document describes the
programmatic interfaces, RESTful APIs, which are supported by Cisco
Software Manager Server (CSM Server). Overview CSM Server supports a set
of finite RESTful APIs. The first step to use ...
If you are using Cisco's new linux-based Cisco Software Manager server,
then you probably want to make sure there is a startup service for
it.I'll assume that you've already installed the CSM server on a
systemd-based linux system. The commands given belo...