IP Telephony: Outgoing Call Problem CUCM702 =>h323=>Cisco2811 with FX0

[campizi28]

Hi,

I've CUCM 7.02 with H323 GW for one cisco 2811 with 2 FXO ports, and i cannot do a outgoing call.

The call is placed and after 12 seconds the call disconect with " Cause Value=47, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=47)"

Regards,

Pedro Silva

[paolo bevilacqua]

Pedro lesson learned, do not put FW between CM and GW, and if you do, at least be aware.