I have 2 E1s which i configured them as trunk group. But i want the first E1 to select b-chan from 1, in which 2.nd E1 to select b-chan starting from 31. I couldn't succeed that :( when you add a Serial isdn interface to a trunk group it doesn't care whether you select descending or ascendign b-chan selection, it always start from 1st channel. Is there a way to configure this?
B channel negotiation could be configured using the command "negotiate b-chan" under the serial interface.There is a command to change the slection sequence to ascending or descending "isdn bchan-order-number-order".
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...